XD-C Naked Controller
Basically the same thing as the XD-C controller, but without a housing. Useful for OEM applications and specific experiment requirements.
Size: 80 x 50 x 19 mm
Power supply: 6 - 15 VDC
Output signal: 30 V (0 - 200 kHz)
Control: Closed loop
Piezo controller (PCB only)
The XD-C Naked is a very compact piezo controller PCB designed to control one ultrasonic piezo stage. The controller reads the integrated encoder of the piezo stage, generates and amplifies the driving signals and communicates with a host controller or PC through a simple ASCII protocol. The controller comes with a user-friendly Windows interface and LabVIEW driver to steer the stage in closed loop.
Important steering parameters can be tuned digitally via the user interface. A motion sequence can be programmed in the user interface to steer the stage with a defined set of control parameters. One can also develop its own control interface by using Xeryon's LabVIEW driver.
In- & output
Power supply: 6 - 24 VDC
Stage connector: D-sub 15 HD (female)
GPIO: On PCB
Serial communication: COM via Micro-USB-B 2.0 / RS-232 (on PCB)
Operating temperature: 0 to 40 °C
The XD-C can be used to drive all of our stages.
Drive signal: 30 V (0 - 200 kHz)
80 x 50 x 19 mm