XD-C Core (PCB only)

We went all the way with this one. The XD-C Core controller is the most stripped-down version of our XD-C controller but still has the full functionality of a piezo-controller. It has USB connectivity, TTL serial communication, closed loop control, etc. In short, the perfect OEM controller, if you know how to solder.

Size: 50 x 50 x 30 mm
Weight: 45g including heatsinks
Power supply: 48 V
Output signal: 45 V (0 - 200 kHz)
Axis: 1
Control: Open- & closed loop
Stage connection: Dsub 15 HD (female)
Communication: USB-C 2.0, Digital IO, Analog IO, I2C data, UART Rx, UART Tx

Request pricing

Piezo controller (PCB only)

The XD-C Core is our most compact piezo controller PCB designed to control one ultrasonic piezo stage. The controller reads the integrated encoder of the piezo stage, generates and amplifies the driving signals and communicates with a host controller or PC through a simple ASCII protocol. The controller comes with a user-friendly Windows interface and LabVIEW driver to steer the stage in closed loop.

Important steering parameters can be tuned digitally via the user interface. A motion sequence can be programmed in the user interface to steer the stage with a defined set of control parameters. One can also develop its own control interface by using one of Xeryon's software libraries. There are libraries available for C++, Python, Matlab or LabVIEW. More can be found on our software page.

Key features


Operating temperature: 0 to 40 °C

In- & output

Axis: 1
Power supply: 48 V
Stage connector: ZIF connector
GPIO: Soldering connection points
Serial communication: USB-C


The XD-C can be used to drive all of our stages.

Output signal

Drive signal: 45 V (0 - 200 kHz)


50 x 50 x 30 mm

User interface

Any system that can generate serial commands

Product pictures