The rack mounted version of our most versatile controller. Single axis or multi, no problem. With joystick connectivity and compatible with every Xeryon product.
Size: Height: 2U, depth: 221 mm
Power supply: 100 - 240 VAC, 47 - 63 Hz
Axes: Up to 12
Control: Open- & closed loop
Stage connection: Dsub 15 HD (female)
Communication: USB-B, RS232, Digital IO, Analog IO, RS422 (optional), UART
For more information on the software, click here.
The XD-19 is a high-end plug and play piezo controller designed to control two, three, six, nine or twelve ultrasonic piezo stages or actuators. The controller reads the integrated encoder of the piezo stage, generates and amplifies the driving signals and communicates with a host controller or PC through a simple ASCII protocol. The controller comes with a user-friendly Windows interface and LabVIEW driver to steer the stage in open and closed loop. Up to 12 stages can be controller individually and at the same moment.
Important steering parameters can be tuned digitally via the user interface. A motion sequence can be programmed in the user interface to steer the stage with a defined set of control parameters. One can also develop its own control interface with Windows, Python, MATLAB or by using Xeryon's LabVIEW driver.
In- & output
Axis: 3, 6, 9 or 12
Power supply: 110 - 240 VAC, 47 - 63 Hz
Analog and Digital IO
Communication: USB-B, RS232, Digital IO, Analog IO, RS422 (optional)*
Operating temperature: 0 to 40 °C
The XD-19 can be used to drive all of our stages.
Drive signal: 45 V (0 - 200 kHz)
Rack mounted version: Height: 2U, depth: 221 mm
Any software that can communicate with a serial port.
* all connections on the PCB can be connected to the controller housing with a dedicated connector on special request of the costumer. All connections are labeled and described in our Controller and Connection manual.