We went all the way for compactness. Fits in your hand, doesn't weigh a thing. It's simple, and it works.
Size: 80 x 54 x 23 mm
Power supply: 48 VDC
Output signal: 45 V (0 - 200 kHz)
Control: Open- & closed loop
Stage connection: Dsub 15 HC (female)
Communication: USB-C 2.0
For more information on the software, click here.
The XD-C is a very compact plug and play piezo controller designed to control one ultrasonic piezo stage. The controller reads the integrated encoder of the piezo stage, generates and amplifies the driving signals and communicates with a host controller or PC through a simple ASCII protocol. The controller comes with a user-friendly Windows interface to steer the stage in open and closed loop. The stages can also be controlled through one of our software libraries which include code for Python, Matlab, C++ and LabVIEW.
Important steering parameters can be tuned digitally via the user interface. A motion sequence can be programmed in the user interface to steer the stage with a defined set of control parameters. One can also develop its own control interface by using Xeryon's LabVIEW driver.
In- & output
Power supply: 48 V DC
Stage connector: D-sub 15 HD (female)
GPIO: On PCB*
Serial communication: USB-C 2.0 / RS-232 on PCB*
Operating temperature: 0 to 40 °C
The XD-C can be used to drive all of our stages, except for the 5 and 1 nm series, which needs to be controlled by the XD-M controller.
Drive signal: 45 V (0 - 200 kHz)
Table top version: 80 x 54 x 23 mm
OEM version: 80 x 54 x 23 mm
Any software that can communicate with a serial port.
* all connections on the PCB can be connected to the controller housing with a dedicated connector on special request of the costumer. All connections are labeled and described in our Controller and Connection manual.