XD-C Core Controller

XD-C Core Controller

We went all the way with this one. The XD-C Core controller is the most stripped-down version of our XD-C controller but still has the full functionality of a piezo-controller. It has USB connectivity, TTL serial communication, closed loop control, etc. In short, the perfect OEM controller, if you know how to solder.

Size: 45 x 35 x 8 mm
Power supply: 6 - 15 VDC
Output signal: 30 V (0 - 200 kHz)
Axis: 1
Control: Closed loop

Request pricing

Piezo controller (PCB only)


The XD-C Core is our most compact piezo controller PCB designed to control one ultrasonic piezo stage. The controller reads the integrated encoder of the piezo stage, generates and amplifies the driving signals and communicates with a host controller or PC through a simple ASCII protocol. The controller comes with a user-friendly Windows interface and LabVIEW driver to steer the stage in closed loop.

Important steering parameters can be tuned digitally via the user interface. A motion sequence can be programmed in the user interface to steer the stage with a defined set of control parameters. One can also develop its own control interface by using Xeryon's LabVIEW driver.

Key features


In- & output

Axis: 1
Power supply: 6 - 24 VDC
Stage connector: ZIF connector
GPIO: Soldering connection points
Serial communication: COM via Micro-USB-B 2.0 (on PCB) / TTL UART (on PCB)

Environment

Operating temperature: 0 to 40 °C

Compatibility

The XD-C can be used to drive all of our stages.

Output signal

Drive signal: 30 V (0 - 200 kHz)


Size

35 x 45 x 8 mm

User interface

Windows
LabVIEW

Product photos



XD-C Core Controller